mirror of
https://github.com/wagiminator/ATmega-Soldering-Station.git
synced 2025-08-08 13:00:59 +03:00
27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# T12 Soldering Station based on ATmega328p
|
|
T12 Quick Heating Soldering Station featuring
|
|
- Temperature measurement of the tip
|
|
- Temperature control via rotary encoder
|
|
- Boost mode by short pressing rotary encoder switch
|
|
- Setup menu by long pressing rotary encoder switch
|
|
- Handle movement detection (by checking ball switch)
|
|
- Iron unconnected detection (by idenfying invalid temperature readings)
|
|
- Time driven sleep/power off mode if iron is unused (movement detection)
|
|
- Measurement of input voltage, Vcc and ATmega's internal temperature
|
|
- Information display on OLED
|
|
- Buzzer
|
|
- Calibrating and managing different soldering tips
|
|
- Storing user settings into the EEPROM
|
|
|
|
Power supply should be in the range of 16V/2A to 24V/3A and well
|
|
stabilized.
|
|
|
|
For calibration you need a soldering iron tips thermometer. For best results
|
|
wait at least three minutes after switching on the soldering station before
|
|
you start the calibration process.
|
|
|
|
Project on EasyEDA: https://easyeda.com/wagiminator/z-solderingstation-smd-v2
|
|
|
|
|
|
|