README

README.md

@@ -1,48 +1,66 @@
 # 1. Overview
 T12 焊台控制器功能介绍
 T12 Quick Heating Soldering Station featuring
- - 烙铁头温度实时监测
- - Temperature measurement of the tip
- - PID温度控制
- - Direct or PID control of the heater
- - 可以通过编码器进行控制温度
- - Temperature control via rotary encoder
- - 短按编码器进入短时升温模式
- - Boost mode by short pressing rotary encoder switch
- - 长按编码器进入主菜单
- - Setup menu by long pressing rotary encoder switch
- - 手柄震动检测（需要手柄含有震动传感器）
- - Handle movement detection (by checking ball switch)
- - 手柄连接检测（通过判断烙铁头温度是否能够被读取来实现）
- - Iron unconnected detection (by idenfying invalid temperature readings)
- - 定时器设定 - 随眠，关机时间
- - Time driven sleep/power off mode if iron is unused (movement detection)
- - 可以测量主控芯片电压以及温度
- - Measurement of input voltage, Vcc and ATmega's internal temperature
- - 在OLED上实现信息显示
- - Information display on OLED
- - 支持无源蜂鸣器
- - Buzzer
- - 允许设置不同烙铁头的温度校准值
- - Calibrating and managing different soldering tips
- - 设置被保存在EEPROM，掉电不丢失
- - Storing user settings into the EEPROM
- - 允许热插拔烙铁头，并弹出烙铁头配置选择菜单
- - Tip change detection
- - 芯片过热以及低电压报警
- - Chip overheating and low voltage alarm
- - 更好的实时温度条以及实时功率条
- - Better real-time temperature bar and real-time power bar
- - 拥有过渡动画
- - Have transition animation
- - 内置屏幕保护程序
- - Built in screen saver
- - 屏幕翻转设置
- - Screen flip settings
- - 内置英文、中文、日文语言包
- - Built in English, Chinese and Japanese language pack
- - 开机密码设置
- - Set System Password
+- 烙铁头温度实时监测
+- Temperature measurement of the tip
+- PID温度控制
+- Direct or PID control of the heater
+- 可以通过编码器进行控制温度
+- Temperature control via rotary encoder
+- 短按编码器进入短时升温模式
+- Boost mode by short pressing rotary encoder switch
+- 长按编码器进入主菜单
+- Setup menu by long pressing rotary encoder switch
+- 手柄震动检测（需要手柄含有震动传感器）
+- Handle movement detection (by checking ball switch)
+- 手柄连接检测（通过判断烙铁头温度是否能够被读取来实现）
+- Iron unconnected detection (by idenfying invalid temperature readings)
+- 定时器设定 - 随眠，关机时间
+- Time driven sleep/power off mode if iron is unused (movement detection)
+- 可以测量主控芯片电压以及温度
+- Measurement of input voltage, Vcc and ATmega's internal temperature
+- 在OLED上实现信息显示
+- Information display on OLED
+- 支持无源蜂鸣器
+- Buzzer
+- 允许设置不同烙铁头的温度校准值
+- Calibrating and managing different soldering tips
+- 设置被保存在EEPROM，掉电不丢失
+- Storing user settings into the EEPROM
+- 允许热插拔烙铁头，并弹出烙铁头配置选择菜单
+
+=========UI upgraded version =========
+
+- Tip change detection
+- 芯片过热以及低电压报警
+- Chip overheating and low voltage alarm
+- 更好的实时温度条以及实时功率条
+- Better real-time temperature bar and real-time power bar
+- 拥有过渡动画
+- Have transition animation
+- 内置屏幕保护程序
+- Built in screen saver
+- 屏幕翻转设置
+- Screen flip settings
+- 内置英文、中文语言包
+- Built in English and Chinese language pack
+- 开机密码设置
+- System Password
+- 允许设置旋钮方向
+- Knob direction setting menu
+- 内嵌看门狗，宕机自动重启
+- Watchdog timer automatic reset the MCU
+
+- V1.8t7 New features:
+------ EEPROM可用性检查机制
+------ EEPROM availability check
+
+------ 允许保存最大30个烙铁头的配置
+------ 30 preservable soldering tip configurations
+
+------ 9段温度曲线拟合
+------ 9 segments of temperature curve fitting
+
 
 Project Video: https://youtu.be/I9ATDxvQ1Bc
 
@@ -67,19 +85,26 @@ Video from LHW-createskyblue (UI-v1.6L): https://b23.tv/LiOe54
 ![IMG_20200816_141230_x.jpg](https://image.easyeda.com/pullimage/B0Crwq4ZAkTLbKYQlWMz32sMSgKbYp6pCCGzzExT.jpeg)
 ![IMG_20200816_130923_x.jpg](https://image.easyeda.com/pullimage/BpBMLRUhObBq2KgvY0ECxCkv6uOqRW2V4trbMem0.jpeg)
 
-## UI Upgrade by createskyblue & lihaoyun6
+## UI-V1.8t6 UI Upgrade by createskyblue & lihaoyun6
 
-LHW-createskyblue created an awesome upgrade to the user interface which can be installed optionally. It features:
+![](software/UI_upgrade_by_createskyblue/img/readme/1.jpg)
+Default control interface
 
-- Beautify the detail page and increase the power bar
-- Menus have ICONS
-- Better scrolling animation
-- Get rid of the U8g graphics library and use the ArduBoy graphics Library (Lite) to improve the frame rate and reduce memory usage to make graphics possible
-- Add flip display Settings to adapt to the habits of different people
-- English, Chinese and Japanese language pack
-- Screen saver
-- System Password
-- Better numerical input experience
+![](software/UI_upgrade_by_createskyblue/img/readme/2.jpg)
+EEPROM availability check
+
+![](software/UI_upgrade_by_createskyblue/img/readme/3.jpg)
+Tip menu
+
+![](software/UI_upgrade_by_createskyblue/img/readme/4.jpg)
+9 segments of temperature curve fitting
+Soldering tip calibration page
+
+![](software/UI_upgrade_by_createskyblue/img/readme/5.jpg)
+Temperature calibration coefficient
+
+![](software/UI_upgrade_by_createskyblue/img/readme/6.jpg)
+Encoder direction regulation
 
 Video from LHW-createskyblue (UI-v1.6L): https://b23.tv/LiOe54
 	

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/.vscode/arduino.json

@@ -1,6 +0,0 @@
-{
-    "board": "arduino:avr:uno",
-    "programmer": "Arduino as ISP",
-    "port": "COM3",
-    "sketch": "1.8t6.ino"
-}

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/.vscode/c_cpp_properties.json

@@ -1,25 +0,0 @@
-{
-    "configurations": [
-        {
-            "name": "Win32",
-            "includePath": [
-                "D:/Program Files (x86)/Arduino/libraries",
-                "D:/Program Files (x86)/Arduino/hardware/arduino/avr/**",
-                "D:/Program Files (x86)/Arduino/hardware/tools/avr/avr/include",
-                "D:/Program Files (x86)/Arduino/hardware/tools/avr/lib/gcc/avr/7.3.0/include",
-                "D:/Program Files (x86)/Arduino/hardware/tools/avr/lib/gcc/avr/7.3.0/include-fixed",
-                "D:/Program Files (x86)/Arduino/tools/**",
-                "D:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\**",
-                "D:\\Program Files (x86)\\Arduino\\tools\\**"
-            ],
-            "forcedInclude": [
-                "D:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\Arduino.h"
-            ],
-            "intelliSenseMode": "msvc-x64",
-            "compilerPath": "D:\\mingw64\\bin\\gcc.exe",
-            "cStandard": "gnu17",
-            "cppStandard": "gnu++14"
-        }
-    ],
-    "version": 4
-}

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/.vscode/launch.json

@@ -1,29 +0,0 @@
-{
-    // 使用 IntelliSense 了解相关属性。 
-    // 悬停以查看现有属性的描述。
-    // 欲了解更多信息，请访问: https://go.microsoft.com/fwlink/?linkid=830387
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "name": "g++.exe - 生成和调试活动文件",
-            "type": "cppdbg",
-            "request": "launch",
-            "program": "${fileDirname}\\${fileBasenameNoExtension}.exe",
-            "args": [],
-            "stopAtEntry": false,
-            "cwd": "${workspaceFolder}",
-            "environment": [],
-            "externalConsole": false,
-            "MIMode": "gdb",
-            "miDebuggerPath": "D:\\mingw64\\bin\\gdb.exe",
-            "setupCommands": [
-                {
-                    "description": "为 gdb 启用整齐打印",
-                    "text": "-enable-pretty-printing",
-                    "ignoreFailures": true
-                }
-            ],
-            "preLaunchTask": "C/C++: g++.exe build active file"
-        }
-    ]
-}

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/.vscode/tasks.json

@@ -1,27 +0,0 @@
-{
-    "tasks": [
-        {
-            "type": "cppbuild",
-            "label": "C/C++: g++.exe build active file",
-            "command": "D:\\mingw64\\bin\\g++.exe",
-            "args": [
-                "-g",
-                "${file}",
-                "-o",
-                "${fileDirname}\\${fileBasenameNoExtension}.exe"
-            ],
-            "options": {
-                "cwd": "D:\\mingw64\\bin"
-            },
-            "problemMatcher": [
-                "$gcc"
-            ],
-            "group": {
-                "kind": "build",
-                "isDefault": true
-            },
-            "detail": "Generated task by Debugger"
-        }
-    ],
-    "version": "2.0.0"
-}

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/1.8t7.ino

@@ -153,7 +153,7 @@ Arduboy2 arduboy;
 #define TIME2SETTLE   950       // time in microseconds to allow OpAmp output to settle
 #define SMOOTHIE      0.05      // OpAmp output smooth factor (1=no smoothing; 0.05 default)
 #define PID_ENABLE    true      // enable PID control
-#define BEEP_ENABLE   false      // enable/disable buzzer
+#define BEEP_ENABLE   true      // enable/disable buzzer
 #define MAINSCREEN    1         // type of main screen (0: big numbers; 1: more infos)
 
 // EEPROM identifier
@@ -253,7 +253,7 @@ PID ctrl(&Input, &Output, &Setpoint, aggKp, aggKi, aggKd, REVERSE);
     1 - 英文 ENGLISH
     2 - 日语 x (此版本不支持)
 */
-byte LANG = 0;
+byte LANG = 1;
 
 
 

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/GUI.ino

@@ -25,8 +25,7 @@ void MainScreen() {
       //arduboy.drawSlowXYBitmap(0, 0, Tag, 16, 16, 0);
       arduboy.setCursor(2, 4); arduboy.print(TipName);
       //显示状态
-      arduboy.setCursor(53, 1);
-      arduboy.setTextSize(2);
+      arduboy.setCursor(94, 5);
       switch (LANG) {
         case 0: arduboy.drawSlowXYBitmap(95, 1, S_table[SysState], 28, 14, 0); break;  //中文 Chinese
         default: //英文 English
@@ -560,7 +559,7 @@ void CalibrationScreen() {
       for (byte y = 0; y < 5; y++) {
         for (byte x = 0; x < 2; x++) {
           if (2 * y + x > CalStep) break;
-          arduboy.setCursor(x * 64 + 10, y * 8 + 16);
+          arduboy.setCursor(x * 64 + 4, y * 8 + 16);
           arduboy.print(CalTemp[2 * y + x]);
           arduboy.print((char)248);
           arduboy.print(F("- "));