增加内存检查机制 Increased EEPROM memory check

增加内存检查机制
Increased EEPROM memory check

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/1.8t7.ino

@@ -162,7 +162,7 @@ bool      BeepEnable  = BEEP_ENABLE;
 #define TempP3 -0.0033245713
 #define TempP4 0.0000045338
 float    PTemp[4] = {TempP1, TempP2, TempP3, TempP4}; //温度拟合系数
-const uint16_t CalTemp[9] = {50,100,150,200,250,300,350,400,450};
+const uint16_t CalTemp[9] = {50, 100, 150, 200, 250, 300, 350, 400, 450};
 char      TipName[TIPNAMELENGTH] = {TIPNAME};
 uint8_t   CurrentTip   = 0;
 uint8_t   NumberOfTips = 1;
@@ -218,7 +218,7 @@ byte Line[4];
 bool RotaryD = false;
 
 //开机非线性动画
-byte BootAnimationY=64;
+byte BootAnimationY = 64;
 
 // Specify the links and initial PID tuning parameters
 PID ctrl(&Input, &Output, &Setpoint, aggKp, aggKi, aggKd, REVERSE);
@@ -283,7 +283,7 @@ void setup() {
 
   //设置屏幕亮度
   SetOLEDLightLevel(32); //降低屏幕亮度 延长OLED使用寿命
-  
+
   //初始化屏幕保护动画
   for (byte a = 0; a < 4; a++) Line[a] = 32 * a;
 
@@ -311,7 +311,7 @@ void setup() {
   setRotary(TEMP_MIN, TEMP_MAX, TEMP_STEP, DefaultTemp);
   // reset sleep timer
   Sleepmillis = millis();
-  
+
   // long beep for setup completion
   beep(); beep();
   ShowVersion();

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/D-EEProm.ino

@@ -1,3 +1,60 @@
+/*EEPROM可用性检查
+  作用：防止因为EEPROM损坏而载入了错误的运行参数导致参数生产安全事故
+*/
+void CheckEEPROM() {
+  byte w, r;
+  int pass = 0, fail = 0;
+  for (int i = 0; i < EEPROM.length(); i++) {
+    //内存测试程序
+    w = random(0, 255);
+    EEPROM[i] = w;
+    r = EEPROM[i];
+    if (w == r) pass++; else fail++;
+
+    //显示测试数据
+    arduboy.clear();
+    arduboy.setTextSize(2);
+    SetTextColor(0);
+    arduboy.setCursor(0, 0);
+    arduboy.print(F(" MEM CHECK "));
+
+    arduboy.setTextSize(1);
+    arduboy.setCursor(8, 40);
+    arduboy.print(i); arduboy.print(F("/")); arduboy.print(EEPROM.length());
+    SetTextColor(1);
+    arduboy.setCursor(0 + 8, 24); arduboy.print(F("PASS-")); arduboy.print(pass);
+    arduboy.setCursor(64 + 8, 24); arduboy.print(F("FAIL-")); arduboy.print(fail);
+
+    arduboy.setCursor(0 + 8, 32); arduboy.print(F("W -> ")); arduboy.print(w);
+    arduboy.setCursor(64 + 8, 32); arduboy.print(F("R -> ")); arduboy.print(r);
+
+
+    //进度标
+    arduboy.setCursor(map(i, 0, EEPROM.length(), 0, 92), 52);
+    arduboy.print(((float)i / EEPROM.length())*100); arduboy.print(F("%"));
+    //进度条
+    arduboy.fillRect(0, 60, map(i, 0, EEPROM.length(), 0, 127), 4, 1);
+    arduboy.display();
+  }
+  //EEPROM存储器可用性检查失败
+  while (fail == 0) {
+    arduboy.clear();
+    arduboy.setTextSize(2);
+    SetTextColor(1);
+    arduboy.setCursor(22, 16);
+    arduboy.print(F("DAMAGED"));
+    arduboy.setTextSize(1);
+    arduboy.setCursor(31, 44);
+    SetTextColor(0);
+    if (millis() / 1000 % 2 == 0)arduboy.print(F("BOOT FAILED"));
+    arduboy.display();
+  }
+
+}
+
+/*查看EEPROM内存
+   通过板载的旋转编码器可以上下滚动翻阅EEPROM中的数据
+*/
 void ViewEEPRom() {
   setRotary(0, 1023, 16, 0);
   lastbutton = (!digitalRead(BUTTON_PIN));
@@ -98,6 +155,7 @@ void GetEEPROM() {
     RotaryD = EEPROM.read(20);
   }
   else {
+    CheckEEPROM();
     EEPROM.update(0, EEPROM_IDENT >> 8); EEPROM.update(1, EEPROM_IDENT & 0xFF);
     UpdateEEPROM();
   }

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/F.ino

@@ -74,15 +74,8 @@ uint16_t getVCC() {
 // get supply voltage in mV
 uint16_t getVIN() {
   long result;
-  result = denoiseAnalog (VIN_PIN); {
-    if      (result < 540) return (result * Vcc / 184.416 + 86.987);
-    else if (result < 660) return (result * Vcc / 173.204 - 878.29);
-    else if (result < 745) return (result * Vcc / 143.579 - 4875);
-    else if (result < 781) return (result * Vcc / 119.109 - 10260);
-    else if (result < 800) return (result * Vcc / 86.178 - 23013);
-    else                   return (result * Vcc / 86.178 - 23113);
-  }    // read supply voltage via voltage divider
-  //return (result * Vcc / 179.474);      // 179.474 = 1023 * R13 / (R12 + R13)
+  result = denoiseAnalog (VIN_PIN);     // read supply voltage via voltage divider
+  return (result * Vcc / 179.474);      // 179.474 = 1023 * R13 / (R12 + R13)
 }
 
 //ADC中断服务