First files added

firmware/Drivers/oled/ssd1306_conf.h

@@ -0,0 +1,64 @@
+/**
+ * Private configuration file for the SSD1306 library.
+ * This example is configured for STM32F0, I2C and including all fonts.
+ */
+
+#ifndef __SSD1306_CONF_H__
+#define __SSD1306_CONF_H__
+
+// Choose a microcontroller family
+//#define STM32F0
+//#define STM32F1
+//#define STM32F4
+//#define STM32L0
+//#define STM32L1
+//#define STM32L4
+//#define STM32F3
+//#define STM32H7
+//#define STM32F7
+#define STM32G0
+
+// Choose a bus
+#define SSD1306_USE_I2C
+//#define SSD1306_USE_SPI
+
+// I2C Configuration
+#define SSD1306_I2C_PORT        hi2c2
+#define SSD1306_I2C_ADDR        (0x3C << 1)
+
+// SPI Configuration
+//#define SSD1306_SPI_PORT        hspi1
+//#define SSD1306_CS_Port         OLED_CS_GPIO_Port
+//#define SSD1306_CS_Pin          OLED_CS_Pin
+//#define SSD1306_DC_Port         OLED_DC_GPIO_Port
+//#define SSD1306_DC_Pin          OLED_DC_Pin
+//#define SSD1306_Reset_Port      OLED_Res_GPIO_Port
+//#define SSD1306_Reset_Pin       OLED_Res_Pin
+
+// Mirror the screen if needed
+// #define SSD1306_MIRROR_VERT
+// #define SSD1306_MIRROR_HORIZ
+
+// Set inverse color if needed
+// # define SSD1306_INVERSE_COLOR
+
+// Include only needed fonts
+#define SSD1306_INCLUDE_FONT_6x8
+#define SSD1306_INCLUDE_FONT_7x10
+#define SSD1306_INCLUDE_FONT_11x18
+#define SSD1306_INCLUDE_FONT_16x26
+
+// The width of the screen can be set using this
+// define. The default value is 128.
+// #define SSD1306_WIDTH           64
+
+// If your screen horizontal axis does not start
+// in column 0 you can use this define to
+// adjust the horizontal offset
+// #define SSD1306_X_OFFSET
+
+// The height can be changed as well if necessary.
+// It can be 32, 64 or 128. The default value is 64.
+// #define SSD1306_HEIGHT          64
+
+#endif /* __SSD1306_CONF_H__ */