McFLY/DiLight
1
0
Fork 0
Code Issues 4 Pull Requests Packages Projects Releases Wiki Activity

Tidy up the code

Browse Source
This commit is contained in:
Anton Mukhin
2023-01-21 19:35:12 +03:00
parent e5045de31c
commit 353c58bfcb
2 changed files with 29 additions and 41 deletions
Download Patch File Download Diff File Expand all files Collapse all files

66
firmware/Core/Src/main.c
View File

@@ -95,13 +95,10 @@ uint8_t TOF_Ready = 0; // Flag to ignore TOF IRQ before it is initialized
uint8_t curLightLevel = 0; // Current light level (0-99)
uint16_t curDist = 0; // Current measured distance in mm
uint16_t btn_ticks; // How many ticks the button is pressed (1 tick = 100ms)
//uint8_t needConfig = 1; // Need to configure the device. Timers won't "react" to events
//uint8_t startConfig = 0; // Flag to start configuration sequence
int8_t dLevel = 1; // Direction of fade: -1 for fade out; 1 for fade in;
//uint8_t manualOn = 0; // Flag to indicate a manual on
DLMode_t DLmode = DL_normal; // Global mode: DL_normal, DL_manual_on, DL_manual_off, DL_need_config, DL_config_waiting, DL_config_accepted, DL_error
DLMode_t prev_mode = DL_normal;
uint8_t modeSwitch = 0; // Flag to switch the mode after the button tap
DLMode_t prev_mode = DL_normal; // To hold the mode during temporary mode switches
uint8_t modeSwitch = 0; // Flag to switch the mode after the button tap
/* USER CODE END PV */
@@ -143,7 +140,6 @@ volatile void loadConfig(void) {
if (HAL_CRC_Calculate(&hcrc, configuration.data32, 2) != configuration.sector.checksum
|| configuration.config.token != CONF_TOKEN) {
//First start or configuration is corrupted
saveConfig(); //Save dafault config
} // else successfully read the configuration
@@ -157,9 +153,9 @@ volatile void saveConfig(void) {
uint32_t l_Error = 0;
//We need it to erase a page
EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;
EraseInitStruct.Page = CONF_FLASH_PAGE;
EraseInitStruct.NbPages = 1;
EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;
EraseInitStruct.Page = CONF_FLASH_PAGE;
EraseInitStruct.NbPages = 1;
if (configuration.config.token != CONF_TOKEN) {
//first start
@@ -213,15 +209,12 @@ void fastBlink(uint8_t count) {
// Range configuration procedure (set on and off ranges)
void configure(void) {
//startConfig = 0;
DLmode = DL_config_waiting;
//Fast blink 5 times
//needConfig = 1;
fastBlink(5);
//Configure ON distance
//needConfig = 1; // in case the button was touched during fast blinks
while (DLmode == DL_config_waiting) {
HAL_Delay(250);
if (curDist > MAX_DIST - MIN_DIST_GAP) setLightLevel(0);
@@ -234,12 +227,10 @@ void configure(void) {
configuration.config.dist_on = curDist; // this will be checked during config save
//Fast blink 2 times
//needConfig = 1;
DLmode = DL_config_waiting;
fastBlink(2);
//Configure OFF distance
//needConfig = 1; // in case the button was touched during fast blinks
while (DLmode == DL_config_waiting) {
HAL_Delay(250);
if (curDist > MAX_DIST) setLightLevel(0);
@@ -250,10 +241,7 @@ void configure(void) {
saveConfig();
//Fast blink 5 times
//needConfig = 1;
fastBlink(5);
//needConfig = 0;
}
/* USER CODE END 0 */
@@ -333,29 +321,30 @@ int main(void)
DLmode = prev_mode;
}
// Check if the button was tapped and we should switch the mode
if (modeSwitch) {
modeSwitch = 0;
switch (DLmode) {
case DL_normal:
DLmode = DL_manual_on;
fastBlink(1);
dLevel = 2;
HAL_TIM_Base_Start_IT(&htim17);
break;
case DL_manual_on:
DLmode = DL_manual_off;
fastBlink(1);
dLevel = -1;
HAL_TIM_Base_Start_IT(&htim17);
break;
case DL_manual_off:
DLmode = DL_normal;
fastBlink(2);
break;
default:
break;
case DL_normal:
DLmode = DL_manual_on;
fastBlink(1);
dLevel = 2;
HAL_TIM_Base_Start_IT(&htim17);
break;
case DL_manual_on:
DLmode = DL_manual_off;
fastBlink(1);
dLevel = -1;
HAL_TIM_Base_Start_IT(&htim17);
break;
case DL_manual_off:
DLmode = DL_normal;
fastBlink(2);
break;
default:
break;
}
}
}
HAL_Delay(50);
/* USER CODE END WHILE */
@@ -704,7 +693,6 @@ void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin) {
if (btn_ticks < 60) {
// Button was not held for more than 6 seconds
if (DLmode == DL_config_waiting) {
//needConfig = 0;
DLmode = DL_config_accepted;
} else {
modeSwitch = 1;
@@ -717,9 +705,9 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) {
if(htim->Instance == TIM16) { //check if the interrupt comes from TIM16 // TIM16 - ticks timer (10Hz - 100ms)
if (btn_ticks < 60) {
btn_ticks++;
} else { // the button is held for more than 6 seconds
} else {
// the button is held for more than 6 seconds
HAL_TIM_Base_Stop_IT(&htim16);
//startConfig = 1;
prev_mode = DLmode;
DLmode = DL_need_config;
}