Imported-Repos/UA3REO-DDC-Transceiver
1
0
Fork 0
mirror of https://github.com/XGudron/UA3REO-DDC-Transceiver.git synced 2025-08-07 16:50:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

Release 9.5.0

Browse Source
This commit is contained in:
Dmitry Panin
2024-02-17 11:27:25 +03:00
parent ff76d60b4d
commit e2f9b40657
3 changed files with 29 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
README.md
View File

@@ -218,8 +218,8 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **Auto Input Switch** - Auto input switch (PTT - mix, CAT - USB)
* **CESSB** - Enable controlled-envelope single-sideband modulation
* **CESSB Compress, dB** - Signal pre-amplification level before compression in CESSB
* **Compressor MaxGain** - Maximum comressor gain
* **Compressor Speed** - TX compressor response speed for transmission (more-faster)
* **TX AGC MaxGain** - Maximum AGC gain
* **TX AGC Speed** - TX compressor response speed for transmission (more-faster)
* **CTCSS Frequency** - Transmit FM CTCSS sub-tone frequency
* **FT8 Auto CQ** - Automatic transition to CQ mode after FT8 communication
* **Input Type** - Select audio input (microphone, line in, USB)
@@ -236,7 +236,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **Repeater offset, kHz"** - Transmission frequency offset in repeater mode
* **SelfHear Volume** - Self Hearing (CW/DIGI) volume relative to the overall transceiver volume
* **TUNER Enabled** - Turning on the antenna tuner
* **Two Signal tune** - Two-signal generator in TUNE mode (1.0 + 2.2kHz)
* **Tune Type** - TUNE operating mode (carrier, two signal tone, multi-tone, white noise)
* **VOX Threshold, dbFS** - VOX Threshold, dbFS
* **VOX Timeout, ms** - VOX transmission delay after silence, milliseconds
* **VOX** - TX Voice activation
@@ -408,6 +408,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **Transverter xxx RF, MHz** - Setting the RF frequency of the transceiver to match the IF
* **VHF Mixer Board** - Enable VHF board with RF mixer support (Wolf-2)
* **VHF Mixer IF, MHz** - Select IF frequency for VHF board mixer (Wolf-2)
* **VHF TCXO, kHz** - Select TCXO frequency for VHF board (Wolf-2)
### Memory Channels