Imported-Repos/UA3REO-DDC-Transceiver
1
0
Fork 0
mirror of https://github.com/XGudron/UA3REO-DDC-Transceiver.git synced 2025-08-07 16:50:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

9.9.0 Release

Browse Source
This commit is contained in:
Dmitry Panin
2024-06-17 15:17:17 +03:00
parent 00a1f2e2ce
commit 821c30340e
3 changed files with 33 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
README.md
View File

@@ -55,7 +55,7 @@ When transmitting, the process occurs in the opposite order, only at the end of
* Switchable AGC (AGC) with adjustable attack rate
* Range map, with the ability to automatically switch modes
* Digital Noise Reduction (DNR), Pulse Noise Reduction (NB)
* CAT virtual COM port (FT-450 / TS-2000 emulation, RTS - PTT, DTR - CW)
* CAT virtual COM port (TS-2000 / FT-450 emulation, RTS - PTT, DTR - CW)
* USB operation (audio transmission, IQ, CAT, KEY, PTT)
* RDS/CW/RTTY decoder, self-control, gauss filter
* SWR Graphs
@@ -70,7 +70,7 @@ When transmitting, the process occurs in the opposite order, only at the end of
* WAV files radio recording and playback, fast broadcast recorded CQ message
* AGC takes into account the characteristics of human hearing (K-Weighting)
* TCXO frequency stabilization (it is possible to use an external clock source, such as GPS)
* WiFi operation: Time synchronization, virtual CAT interface (see Scheme/WIFI-CAT-instruction.txt)
* WiFi operation: Time synchronization, external WiFi services
* Tangent support Yaesu MH-36 и MH-48
* Hardware self-testing
* Firmware update over USB, SD, WiFi
@@ -190,7 +190,6 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **ADC Preamp** - Turn on the preamplifier built into the ADC
* **ADC Randomizer** - Enables ADC digital line encryption
* **AGC Gain target, LKFS** - Maximum AGC gain (Maximum volume with AGC on)
* **AGC Spectral** - Enable FFT-based AGC
* **AGC Threshold** - Enabling the AGC opening threshold
* **Att step, dB** - Attenuator tuning step
* **Attenuation, dB** - Current attenuation
@@ -332,7 +331,6 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **WIFI Network** - WiFi hotspot selection
* **WIFI Network Pass** - Set password for WiFi hotspot
* **WIFI Timezone** - Time zone (for updating the time via the Internet)
* **WIFI CAT Server** - Server for receiving CAT commands via WIFI
* **WIFI Update ESP firmware** - Start cloud autoupdate firmware for ESP-01 (if present)
* **ALLQSO.RU Token/LogId** - Token и LogID from https://allqso.ru/ web-log
@@ -363,7 +361,8 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **BPF x** - Bandpass filter parameters
* **CAT Type** - Type of CAT subsystem (FT-450 / TS-2000)
* **COM CAT DTR/RTS** - Configuring the functions of the DTR/RTS control lines of the CAT port
* **COM DEBUG DTR/RTS** - Configuring the functions of the DTR/RTS control lines of the Debug port
* **SEC COM Mode** - Select the operating mode of the secondary COM port (debugging, CAT)
* **SEC COM DTR/RTS** - Configuring the functions of the DTR/RTS control lines of the Debug port
* **CICCOMP Shift** - Bit shift after CIC compensator
* **Calibrate reset** - Reset all calibrations to defaults
* **DAC Driver Mode** - DAC Driver OPA2673 bias mode (2 = 100% bias, 1 = 75% bias, 0 = 50% bias)
@@ -405,7 +404,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **RF-Unit Type** - RF-Unit Type (QRP / BIG)
* **RTC COARSE CALIBR** - Very coarse clock crystal calibration
* **RTC FINE CALIBR** - Clock crystal calibration, one division is 0.954 ppm
* **S METER** - S-meter calibration
* **S METER** - S-meter calibration (LHF 160/80, MHF 40/30/20/17, HHF 15/12/10, 6M, VHF, SHF)
* **Sequencer support** - External sequencer support (output throught line EXT_TUNE)
* **SSB Power addition** - Addition of RF power in SSB power, %
* **SWR FWD/BWD RATE** - Adjustment of the transformation ratio of the SWR meter (forward / return)