Imported-Repos/UA3REO-DDC-Transceiver
1
0
Fork 0
mirror of https://github.com/XGudron/UA3REO-DDC-Transceiver.git synced 2025-08-07 16:50:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

11.3.0 Release

Browse Source
This commit is contained in:
UA3REO
2025-02-16 21:34:14 +03:00
parent 044cce6dc8
commit 81cead5e9e
3 changed files with 60 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
README.md
View File

@@ -228,6 +228,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **ADC Shutdown** - Turn off the ADC while TX
* **AGC MaxGain** - Maximum AGC gain
* **AGC Speed** - TX compressor response speed for transmission (more-faster)
* **TX AGC Clipping** - Determines whether the AGC will sharply limit the signal gain during large amplitude spikes
* **ATU Cap** - Tuner Capacitance Combination
* **ATU Enabled** - Turning on the automatic antenna tuner
* **ATU Ind** - Combination of tuner inductances
@@ -288,6 +289,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **RX EQ xxx** - Receiver equalizer levels
* **MIC EQ xxx** - Microphone equalizer levels
* **EQ Q xxx** - The quality factor of each equalizer channel
### SCREEN Settings
@@ -450,6 +452,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **SWR Protector** - SWR protection mode selection: Off, low power, transmission off
* **TSignal Balance** - Sets the power balance between signals in Two signal tune mode
* **TX Start Delay** - Delay before the RF signal is applied (ms), so that the relay has time to trigger
* **TX End Delay** - Delay when switching from TX to RX (stopping the signal until the relay turns off)
### Calibration Reset
* **Settings reset** - Reset all settings to defaults
@@ -493,6 +496,12 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **WSPR Power, dBm** - Sets the power report sent in the beacon message
* **WSPR Band xxx** - Select bands to WSPR beacon
### Efficiency
* **Cable Type** - Selecting the cable used in the antenna-feeder device
* **Cable Length** - Cable length from transceiver to antenna
* **Calc Efficiency** - Starting the efficiency calculation. To calculate, you need to turn off the tuner (to know the SWR of the antenna-feeder device) and apply the RF carrier
### DX Cluster
* Show DX Cluster info by current band (from internet)
@@ -553,3 +562,7 @@ Displays information about radio amateurs currently in the current band using "W
* **Calibrate SWR** - Assistant in measuring SWR and power meter
* **Calibrate Power** - Assistant in adjusting RF Power output
### Debug Console
* Display console with system debug information (copy of what is sent to debug COM port)