Imported-Repos/UA3REO-DDC-Transceiver
1
0
Fork 0
mirror of https://github.com/XGudron/UA3REO-DDC-Transceiver.git synced 2025-08-07 16:50:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

10.1.0 Release

Browse Source
This commit is contained in:
UA3REO
2024-08-13 21:41:43 +03:00
parent e4d773e16e
commit 77e28cc57f
3 changed files with 40 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
README.md
View File

@@ -243,15 +243,18 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **MIC Boost** - +20db hardware mic amplifier
* **MIC EQ xxx** - Microphone equalizer levels
* **MIC Gain** - Microphone gain
* **MIC Noise Gate** - The level below which the microphone signal is muted, dbFS
* **MIC DSP Type** - Type of DSP processing of the microphone path: None, Downward Expander, Upward/Downward Compressor, Limiter, Noise Gate
* **MIC DSP Threshold** - Threshold of selected microphone DSP processing
* **MIC DSP Ratio** - Level of slope for selected microphone DSP processing
* **MIC Reverber** - Microphone reverberator level
* **Power for each band** - Save power settings for each band individually
* **Power for each mode** - Save power settings for each mode individually
* **RF Power** - Transmission power,%
* **Repeater Mode"** - Operation mode via repeater
* **Repeater offset, kHz"** - Transmission frequency offset in repeater mode
* **SelfHear SSB** - Self-monitoring for SSB/AM modes, always active for DIGI/RTTY/LOOPBACK
* **SelfHear Volume** - Self Hearing (CW/DIGI) volume relative to the overall transceiver volume
* **SelfHear on SSB** - Self-monitoring for SSB/AM modes, always active for DIGI/RTTY/LOOPBACK
* **SelfHear VOICE** - Self Hearing volume at voice modes relative to the overall transceiver volume
* **SelfHear DIGI** - Self Hearing volume at DIGI modes relative to the overall transceiver volume
* **TUNER Enabled** - Turning on the antenna tuner
* **Tune Type** - TUNE operating mode (carrier, two signal tone, multi-tone, white noise)
* **TOT, min** - Protection of the transmitter from long-term operation, automatic shutdown after time has elapsed
@@ -261,8 +264,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
### CW Settings
* **Auto CW Mode** - Automatic transition to CW mode when the key is pressed
* **CW In SSB** - Allow CW TX manipulation in SSB mode
* **Auto CW Mode** - Automatic switching to CW mode when pressing the key, or only manipulation during transmission
* **DotToDash Rate** - Keyer dash to dot length rate
* **Edges smooth, ms** - Smoothing signal edges
* **Iambic Keyer** - Enable Iambic mode keyer
@@ -308,8 +310,6 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **FFT Speed** - FFT and waterfall speed
* **FFT Style** - FFT style: 1(gradient), 2(fill), 3(dots), 4(contour), 5(gradient + contour)
* **FFT Window** - Select FFT window (1-Dolph–Chebyshev 2-Blackman-Harris 3-Nutall 4-Blackman-Nutall 5-Hann 6-Hamming 7-No window)
* **FFT Zoom CW** - FFT spectrum zooming for CW Mode
* **FFT Zoom** - FFT spectrum zooming
* **FFT dBm Grid** - FFT signal power grid
* **LCD Brightness** - Set LCD brightness (not all lcd support)
* **LCD Sleep Timeout** - Idle time before the screen brightness decreases, sec (0 - disabled)