Imported-Repos/UA3REO-DDC-Transceiver
1
0
Fork 0
mirror of https://github.com/XGudron/UA3REO-DDC-Transceiver.git synced 2025-08-07 16:50:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

12.4.0 Release

Browse Source
This commit is contained in:
UA3REO
2025-04-23 13:20:47 +03:00
parent 606d52f065
commit 5847321011
3 changed files with 75 additions and 109 deletions
Download Patch File Download Diff File Expand all files Collapse all files

80
README.md
View File

@@ -60,9 +60,9 @@ When transmitting, the process occurs in the opposite order, only at the end of
* RDS/CW/RTTY decoder, self-control, gauss filter
* SWR Graphs
* Spectrum analyzer
* FT8 receiver/transmitter
* FT8/FT4 receiver/transmitter
* SSTV decoder
* Automatic send FT8 qso to log https://allqso.ru/
* Automatic send FT8/FT4 qso to log https://allqso.ru/
* WSPR Beacon
* VOX
* Equalizer TX/RX, reverber
@@ -96,54 +96,6 @@ After assembly, you need to flash FPGA and STM32 chips. <br>
If necessary, calibrate the transceiver through the appropriate menu <br>
WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT commands 1.7.4 and higher <br>
## Management
* **AF GAIN** - Volume
* **RIT / GAIN** - When the RIT function is active - smooth offset from the selected transceiver frequency. Inactive - IF gain control
* **ENC MAIN** - Main encoder for frequency control and menu settings
* **ENC 2** - Auxiliary encoder for menu operation. In normal mode, quickly switches the frequency, in CW fast change WPM
* **ENC 2[click]** - In CW mode, toggles between fast step and WPM selection, in other modes it opens the bandwidth properties.
* **BAND -** - Switch to the band below
* **BAND +** - Switch to higher band
* **MODE -** - Mode group switching SSB-> CW-> DIGI-> FM-> AM
* **MODE +** - Switching subgroup mode LSB-> USB, CW_L-> CW_U, DIGI_U-> DIGI_L, NFM-> WFM, AM-> IQ-> LOOP
* **FAST** - Mode of fast x10 rewinding of the frequency by the main encoder (configurable)
* **FAST [clamp]** - Frequency step settings
* **PRE** - Turn on the preamplifier (LNA)
* **PRE [clamp]** - Turn on the driver and / or amplifier ADC
* **ATT** - Turn on the attenuator
* **REC** - Save audio to SD card
* **CQ** - Play recorded CQ-message from SD card
* **MUTE** - Mute the sound
* **MUTE [clamp]** - Scanner mode
* **AGC** - Turn on AGC (automatic gain control)
* **AGC [clamp]** - AGC settings
* **A = B** - Setting the second bank of the receiver equal to the current
* **BW** - Switch to bandwidth selection menu (LPF)
* **BW [clamp]** - Switch to bandwidth selection menu (HPF)
* **TUNE** - Turn on the carrier for tuning the antenna
* **RF POWER** - Transmitter power selection
* **RF POWER [clamp]** - Squelch setting
* **A / B** - Switches between VFO-A / VFO-B receiver settings banks
* **A / B [clamp]** - Enable automatic mode change by bandmap
* **DOUBLE** - Turn on the dual receiver
* **DOUBLE [clamp]** - Switching between the modes of the dual receiver A&B (each channel of the headphones has its own path) or A + B (mixing signals of 2 receivers)
* **DNR** - Enable digital noise reduction
* **DNR [clamp]** - Turn on the impulse noise suppressor (NB)
* **NOTCH** - Turn on the automatic Notch filter to eliminate narrowband interference
* **NOTCH [clamp]** - Turn on the manual Notch filter to eliminate narrowband interference
* **SPLIT** - Allows you to split transmission and reception to different VFO banks
* **RIT [clamp]** - Enables RIT control from the front panel
* **WPM** - Switch to key speed selection menu (WPM)
* **WPM [clamp]** - Automatic key enable
* **MENU** - Go to the menu
* **MENU [clamp]** - Enable key lock LOCK
* **MENU [at power on]** - Reset transceiver settings
* **MENU [at power on+PRE]** - Reset transceiver settings and calibration
* **RIT** - Offset of the receiving frequency relative to the current frequency (TX without offset)
* **XIT** - Offset of the transmission frequency relative to the current frequency (RX without offset)
## Settings
### TRX Settings
@@ -151,7 +103,8 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **ANT type** - Select antenna type (TX/RX or RX only)
* **Band Map** - Band Map, automatically switches mode depending on the frequency
* **Beeper** - Beep on key press
* **Callsign** - User callsign
* **Callsign** - Operator callsign
* **Operator Name** - Operator name
* **Channel Mode** - Channel frequency mode (for LPD/PMR and etc.)
* **Custom Transverter** - Enable external transverter on non-ham band (just offset display frequency)
* **Debug Type** - Output of debug and service information to USB / UART ports
@@ -242,7 +195,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **CESSB Compress, dB** - Signal pre-amplification level before compression in CESSB
* **DRV Shutdown** - Turn off the DAC driver while RX
* **CTCSS Frequency** - Transmit FM CTCSS sub-tone frequency
* **FT8 Auto CQ** - Automatic transition to CQ mode after FT8 communication
* **FT8 Auto CQ** - Automatic transition to CQ mode after FT8/FT4 communication
* **Input Type** - Select audio input (microphone, line in, USB)
* **LINE Gain** - Line input codec gain
* **MIC Boost** - +20db hardware mic amplifier
@@ -286,8 +239,20 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **Pitch** - Detuning the receiver generator from the transmit frequency
* **Stereo** - Splitting the CW bandwidth into headphone channels (audio panorama)
* **Self Hear** - Self-control CW (key press is heard)
* **Macros x** - Setting up macros for CW transmission
* **Macros x name** - Setting the macro name to be displayed in the interface
### Macros
* **CW Macros x** - Setting up macros for CW transmission
* **CW Macros x name** - Setting the CW-macro name to be displayed in the interface
* **SSB Macros x name** - Setting the SSB-macro name to be displayed in the interface
Allowed insertions in macros:
* {MYCALL} - Operator callsign
* {DXCALL} - Correspondent callsign
* {MYNAME} - Operator name
* {MYLOC} - Operator locator
* {CLRDX} - Clear correspondent callsign
### Equalizer Settings
@@ -420,6 +385,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **RTC COARSE CALIBR** - Very coarse clock crystal calibration
* **RTC FINE CALIBR** - Clock crystal calibration, one division is 0.954 ppm
* **Sequencer support** - External sequencer support (output through line EXT_TUNE)
* **Swap AF & IF** - Swap AF Gain & IF Gain resistors
* **TCXO Frequency, kHz** - Frequency adjustment of the reference oscillator
* **VCXO Correction** - Correction for main generator frequency offset
* **Touchpad flip** - Flip the touchpad operation horizontally/vertically
@@ -468,7 +434,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
### Calibration Reset
* **Settings reset** - Reset all settings to defaults
* **Calibrate reset** - Reset all calibrations to defaults
* **WiFi Settings reset** - Reset all WiFi setitngs to defaults
* **Personal reset** - Reset all personal and WiFi setitngs to defaults
### Memory Channels
@@ -549,6 +515,10 @@ Displays information about radio amateurs currently in the current band using "W
* Print statistics from RDA award (from internet)
### FT4
* FT4 Receiver / transmitter
### FT8
* FT8 Receiver / transmitter