Imported-Repos/UA3REO-DDC-Transceiver
1
0
Fork 0
mirror of https://github.com/XGudron/UA3REO-DDC-Transceiver.git synced 2025-08-07 16:50:33 +03:00
Code Issues Packages Projects Releases Wiki Activity

9.8.0 Release

Browse Source
This commit is contained in:
Dmitry Panin
2024-05-01 12:41:58 +03:00
parent 79ce964a0d
commit 00a1f2e2ce
3 changed files with 46 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
README.md
View File

@@ -42,7 +42,7 @@ When transmitting, the process occurs in the opposite order, only at the end of
* Supply voltage: 13.8V (overvoltage and polarity reversal protection)
* Consumption current when receiving: ~0.7А (3'2 QRP), 0.9A (7' BIG)
* Current consumption during transmission: ~2.5А+ (QRP), 15A+ (BIG)
* Support for different displays: RA8875/HX8357B/HX8357C/ST7789/ST7796S/ST7735S/ILI9341/ILI9481/ILI9486
* Support for different displays: RA8875/HX8357B/HX8357C/ST7789/ST7796S/ST7735S/ILI9341/ILI9481/ILI9486/ILI9488
## Transceiver Features
@@ -214,8 +214,9 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **RX AGC Max gain** - Limit of AGC gain, dB
* **RX AGC Speed** - AGC (automatic signal level control) response speed for reception (more-faster)
* **RX EQ xxx** - Receiver equalizer levels
* **TRX Samplerate** - Max FFT/samplerate on CW/SSB/NFM/DIGI/etc modes
* **TRX Samplerate** - Max FFT/samplerate on SSB/DIGI/etc modes
* **FM Samplerate** - Max FFT/samplerate on NFM/WFM mode
* **CW Samplerate** - Max FFT/samplerate on CW mode
* **VAD Threshold** - VAD voice detector threshold (noise suppressor for SSB mode and SCAN mode)
* **Volume step** - AF gain step by ENC2 (X1, Lite)
* **Volume** - AF gain
@@ -224,7 +225,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
### TX Settings
* **ADC Shutdown** - Turn off the ADC while TXing
* **ADC Shutdown** - Turn off the ADC while TX
* **ATU Cap** - Tuner Capacitance Combination
* **ATU Enabled** - Turning on the automatic antenna tuner
* **ATU Ind** - Combination of tuner inductances
@@ -233,6 +234,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **Auto Input Switch** - Auto input switch (PTT - mix, CAT - USB)
* **CESSB** - Enable controlled-envelope single-sideband modulation
* **CESSB Compress, dB** - Signal pre-amplification level before compression in CESSB
* **DRV Shutdown** - Turn off the DAC driver while RX
* **TX AGC MaxGain** - Maximum AGC gain
* **TX AGC Speed** - TX compressor response speed for transmission (more-faster)
* **CTCSS Frequency** - Transmit FM CTCSS sub-tone frequency
@@ -346,8 +348,10 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
### Satellites
* **SAT Mode** - Enable satellite mode
* **Auto Doppler** - Automatically shifts the transceiver frequency based on the calculated Doppler effect
* **Download TLE** - Download current satellite data
* **Select SAT** - Select a satellite from the downloaded TLE file
* **Calc Pass** - Calculate future sattelite passes over QTH (Local time)
* **QTH xxx** - Setting the Latitude\Longitude\Altitude of your location
### Calibration [appears by long pressing the MENU button in the settings menu]
@@ -425,6 +429,7 @@ WiFi module ESP-01 must have fresh firmware with SDK 3.0.4 and higher, and AT co
* **VHF Mixer Board** - Enable VHF board with RF mixer support (Wolf-2)
* **VHF Mixer IF, MHz** - Select IF frequency for VHF board mixer (Wolf-2)
* **VHF TCXO, kHz** - Select TCXO frequency for VHF board (Wolf-2)
* **VHF TCXO Correction** - Correction for VHF board TCXO generator frequency offset (Wolf-2)
### Memory Channels
@@ -486,6 +491,10 @@ Displays information about radio amateurs currently in the current band using "W
* Displaying the ionogram for the selected URSI Code (from internet)
### foF2 Map
* Displaying the foF2 frequency map (from internet)
### SWR Analyser
* Run SWR analizer (Band SWR - on current band, HF SWR - on all HF bands, Custom SWR - in selected range)