更改默认界面配色Change the default interface color scheme

1.主界面默认黑色底
2.增加主报警屏幕闪烁
3.增加两条可输入指令
EEPROM-查看EEPROM内存
RESET.   -重置数据

1. Default black background on the main interface
2. Increase flicker of main alarm screen
3. Add two input instructions, respectively
EEPROM- View EEPROM memory
RESET. - RESET data

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/1.8t7.ino

@@ -113,12 +113,12 @@ Arduboy2 arduboy;
 #define TEMP_DEFAULT  320       // default start setpoint
 #define TEMP_SLEEP    150       // temperature in sleep mode
 #define TEMP_BOOST     60       // temperature increase in boost mode
-#define TEMP_STEP      10       // rotary encoder temp change steps
+#define TEMP_STEP      5       // rotary encoder temp change steps
 
 // Default tip temperature calibration values
 #define TEMPCHP       30        // chip temperature while calibration
 #define TIPMAX        30         // max number of tips
-#define TIPNAMELENGTH 6         // max length of tip names (including termination)
+#define TIPNAMELENGTH 7         // max length of tip names (including termination)
 #define TIPNAME       "SZtip"   // default tip name
 
 
@@ -135,7 +135,7 @@ Arduboy2 arduboy;
 #define MAINSCREEN    1         // type of main screen (0: big numbers; 1: more infos)
 
 // EEPROM identifier
-#define EEPROM_IDENT   0x140B   // to identify if EEPROM was written by this program
+#define EEPROM_IDENT   0x140C   // to identify if EEPROM was written by this program
 
 //Beep
 #define SetBeepCoolTime 200
@@ -241,7 +241,7 @@ void setup() {
 
   //启动arduboy内核
   arduboy.begin();
-  arduboy.setFrameRate(30);
+  arduboy.setFrameRate(15);
 
   //Serial.begin(115200);
 

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/D-EEProm.ino

@@ -10,31 +10,28 @@ void CheckEEPROM() {
     EEPROM[i] = w;
     r = EEPROM[i];
     if (w == r) pass++; else fail++;
+    if (arduboy.nextFrame()) {
+      //显示测试数据
+      arduboy.clear();
+      arduboy.setTextSize(2);
+      SetTextColor(0);
+      arduboy.setCursor(0, 0);
+      arduboy.print(F(" MEM CHECK "));
 
-    //显示测试数据
-    arduboy.clear();
-    arduboy.setTextSize(2);
-    SetTextColor(0);
-    arduboy.setCursor(0, 0);
-    arduboy.print(F(" MEM CHECK "));
+      arduboy.setTextSize(1);
+      arduboy.setCursor(8, 40);
+      arduboy.print(i); arduboy.print(F("/")); arduboy.print(EEPROM.length());
+      SetTextColor(1);
+      arduboy.setCursor(0 + 8, 24); arduboy.print(F("PASS-")); arduboy.print(pass);
+      arduboy.setCursor(64 + 8, 24); arduboy.print(F("FAIL-")); arduboy.print(fail);
 
-    arduboy.setTextSize(1);
-    arduboy.setCursor(8, 40);
-    arduboy.print(i); arduboy.print(F("/")); arduboy.print(EEPROM.length());
-    SetTextColor(1);
-    arduboy.setCursor(0 + 8, 24); arduboy.print(F("PASS-")); arduboy.print(pass);
-    arduboy.setCursor(64 + 8, 24); arduboy.print(F("FAIL-")); arduboy.print(fail);
+      arduboy.setCursor(0 + 8, 32); arduboy.print(F("W -> ")); arduboy.print(w);
+      arduboy.setCursor(64 + 8, 32); arduboy.print(F("R -> ")); arduboy.print(r);
 
-    arduboy.setCursor(0 + 8, 32); arduboy.print(F("W -> ")); arduboy.print(w);
-    arduboy.setCursor(64 + 8, 32); arduboy.print(F("R -> ")); arduboy.print(r);
+      ProgressBar(i, 0, EEPROM.length(), 0, 60, 128, 4, 1);
 
-
-    //进度标
-    arduboy.setCursor(map(i, 0, EEPROM.length(), 0, 92), 52);
-    arduboy.print(((float)i / EEPROM.length())*100); arduboy.print(F("%"));
-    //进度条
-    arduboy.fillRect(0, 60, map(i, 0, EEPROM.length(), 0, 127), 4, 1);
-    arduboy.display();
+      arduboy.display();
+    }
   }
   //EEPROM存储器可用性检查失败
   while (fail != 0) {
@@ -56,7 +53,7 @@ void CheckEEPROM() {
    通过板载的旋转编码器可以上下滚动翻阅EEPROM中的数据
 */
 void ViewEEPRom() {
-  setRotary(0, 1023, 16, 0);
+  setRotary(0, 1023, 4, 0);
   lastbutton = (!digitalRead(BUTTON_PIN));
   arduboy.setTextSize(1);
   do {

software/UI_upgrade_by_createskyblue/Program/1.8/1.8t7/GUI.ino

@@ -1,8 +1,7 @@
 
 // draws the main screen
 void MainScreen() {
-  if (!(arduboy.nextFrame())) //帧率锁
-    return;
+  if (!(arduboy.nextFrame())) return;
   //状态
   byte SysState;
   if (ShowTemp > 500) SysState = 0;
@@ -16,7 +15,7 @@ void MainScreen() {
   else SysState = 6;
   if (SysState != 1) {
     if (MainScrType) {
-      //arduboy.invert(0);
+      arduboy.invert(1);
       arduboy.clear();
       //详细信息页
       arduboy.fillRect(0, 0, 128, 64, 1); //白底
@@ -24,7 +23,7 @@ void MainScreen() {
       SetTextColor(0);
       //预设名
       //arduboy.drawSlowXYBitmap(0, 0, Tag, 16, 16, 0);
-      arduboy.setCursor(7, 4); arduboy.print(TipName);
+      arduboy.setCursor(2, 4); arduboy.print(TipName);
       //显示状态
       arduboy.setCursor(53, 1);
       arduboy.setTextSize(2);
@@ -70,7 +69,11 @@ void MainScreen() {
 
       arduboy.display();
       //警报声
-      if (getChipTemp() > 80 && ((millis() * 4) / 1000) % 2 || (float)Vin / 100 < UnderVoltage && ((millis() * 4) / 1000) % 2) beep();
+      if (getChipTemp() > 80 && ((millis() * 4) / 1000) % 2 || (float)Vin / 100 < UnderVoltage && ((millis() * 4) / 1000) % 2) {
+        beep();
+        arduboy.invert(0);
+      };
+
     } else {
       //arduboy.invert(1);
       arduboy.setTextSize(6);
@@ -85,6 +88,8 @@ void MainScreen() {
       arduboy.display();
     }
   }
+
+
 }
 void DrawNumRect(byte x, byte y, byte size, int n) {
   arduboy.setCursor(3 + x, 3 + y);
@@ -109,7 +114,7 @@ void DrawStatusBar(bool color) {
   arduboy.drawLine(map(Setpoint, 0, 500, 2, 102) - 1, 63, map(Setpoint, 0, 500, 2, 102) - 1, 54, !color);
 
   //画指示针
-  arduboy.drawSlowXYBitmap(map(Setpoint, 0, 500, 2, 102) - 3, 59, Pointer, 5, 4, !color);
+  arduboy.drawSlowXYBitmap(map(Setpoint, 0, 500, 2, 102) - 3, 60, Pointer, 5, 4, !color);
 
   //功率条
   arduboy.drawRect(104, 54, 23, 9, color);
@@ -131,6 +136,7 @@ void SetTextColor(bool color) {
 
 // setup screen
 void SetupScreen() {
+  arduboy.invert(0);
   //关闭加热
 #if UsePMOS
   analogWrite(CONTROL_PIN, 0);
@@ -259,7 +265,6 @@ void TipScreen() {
       default:  repeat = false;      break;
     }
   }
-  ViewEEPRom();
 }
 
 //温控设置菜单
@@ -515,6 +520,17 @@ void ChangeTipScreen() {
   CurrentTip = selected;
   GetEEPRomTip(CurrentTip);
   beep();
+  //控制台指令
+  String s = TipName;
+  if (s == "EEPROM\0") ViewEEPRom();
+  if (s == "RESET.\0") {
+    MenuLevel = 7;
+    if (MenuScreen(0)) {
+      for (int i = 0 ; i < EEPROM.length() ; i++) EEPROM.write(i, 255);
+      resetFunc();
+    }
+  }
+  // if (s == "LIGHT.\0")
   ShowPTemp(&PTemp[0]);
 
 
@@ -546,11 +562,14 @@ void CalibrationScreen() {
           if (2 * y + x > CalStep) break;
           arduboy.setCursor(x * 64 + 10, y * 8 + 16);
           arduboy.print(CalTemp[2 * y + x]);
-          arduboy.print(F(" - "));
+          arduboy.print((char)248);
+          arduboy.print(F("- "));
           if (2 * y + x == CalStep) arduboy.print(getRotary());
           else arduboy.print(xx[2 * y + x]);
         }
       }
+      //进度条
+      ProgressBar(CalStep + 1, 0, 9, 0, 60, 128, 4, 1);
 
       CheckLastButton();
       arduboy.display();
@@ -755,3 +774,16 @@ void ShowVersion() {
   arduboy.display();
   delay(300);
 }
+
+/*进度条
+   传入：i=值 a=值的最小值 b=值的最大值 x=左上顶点x轴坐标 y=左上顶点y轴坐标 w=宽度 h=高度 c=颜色
+*/
+void ProgressBar(int i, int a, int b, byte x, byte y, byte w, byte h, bool c) {
+  SetTextColor(c);
+  arduboy.setTextSize(c);
+  //进度标
+  arduboy.setCursor(map(i, a, b, 0, 92), 52);
+  arduboy.print(((float)i / (b - a)) * 100); arduboy.print(F("%"));
+  //进度条
+  arduboy.fillRect(x, y, map(i, a, b, 0, w), h, c);
+}