Imported-Repos/ATmega-Soldering-Station
1
0
Fork 0
mirror of https://github.com/wagiminator/ATmega-Soldering-Station.git synced 2025-08-08 13:00:59 +03:00
Code Issues Packages Projects Releases Wiki Activity

Upload new version

Browse Source
This commit is contained in:
wagiminator
2020-06-21 14:32:03 +02:00
parent c8740e9376
commit 93ab89446f
1 changed files with 19 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
README.md
View File

@@ -16,14 +16,24 @@ T12 Quick Heating Soldering Station featuring
- Calibrating and managing different soldering tips
- Storing user settings into the EEPROM
Video: https://youtu.be/I9ATDxvQ1Bc
Project Video: https://youtu.be/I9ATDxvQ1Bc
Video from John Glavinos (electronics4all): https://youtu.be/4YDcWfOQmz4
Project Files at EasyEDA: https://easyeda.com/wagiminator/z-solderingstation-smd-v2
# Soldering Station v2.0: #
![IMG_20190731_190146_x.jpg](https://image.easyeda.com/pullimage/iSYD3M8FjNd8ndt1cC7noTcUAdRtz9oFH6hKmoNl.jpeg)
![IMG_20190731_182904_x.jpg](https://image.easyeda.com/pullimage/kgryPQpReu7YGh16ewXIt2tQha6rTmhtARw9nPZh.jpeg)
# Soldering Station v2.5: #
![IMG_20200621_132138_x2.jpg](https://image.easyeda.com/pullimage/8LPUnbOCw2uFf1ozHYkTESbvH1LjlA1zKstsrS5v.jpeg)
![IMG_20200621_121350_x.jpg](https://image.easyeda.com/pullimage/5ZW6mQs1im9htCg3NJSryApeGUiSlwTFXnvxJSLq.jpeg)
# 2. Power Supply Specification Requirements #
Choose a power supply with an output voltage between 16V and 24V which can provide an output current according to the table below. The power supply must be well stabilized. The current and power is determined by the resistance (R = 8 Ohm) of the heater.
@@ -68,7 +78,15 @@ In addition to the components for the PCB you will need the following:
- 4 Self-tapping screws (2.3 * 5 mm)
![parts.jpg](https://image.easyeda.com/pullimage/A29gEDpw2Ld6S96m6f88GDKLpD0YJHm0m3R5Tp5r.jpeg)
![IMG_20200621_130414_x.jpg](https://image.easyeda.com/pullimage/NQZMhCwVRTmA4HVYrDjr6y938flXDBzT6woWXocX.jpeg)
Make sure that all parts fit nicely into the case. Solder the wires to the connectors and protect them with heat shrinks. Use thick wires (AWG18) for the power connections. Make all connections according to the schematic down below. Solder the wires directly to the corresponding pads on the pcb. Upload the firmware and screw the pcb on top of the case.
![connections.png](https://image.easyeda.com/pullimage/q0JfyFSQSTueZhpBkhrBhFbxtL1UqRARK1nrKThv.png)
# 6. License #
![license.png](https://i.creativecommons.org/l/by-sa/3.0/88x31.png)
This work is licensed under Creative Commons Attribution-ShareAlike 3.0 Unported License.
(http://creativecommons.org/licenses/by-sa/3.0/)