Imported-Repos/ATmega-Soldering-Station
1
0
Fork 0
mirror of https://github.com/wagiminator/ATmega-Soldering-Station.git synced 2025-08-07 13:00:30 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Stefan Wagner
2020-04-30 22:32:44 +02:00
committed by GitHub
parent 0b089b6a6f
commit 8767103f4e
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -34,6 +34,6 @@ A thermocouple (temperature sensor) is located in the T12 soldering tip. It crea
# 3. Heater High Side Switch with N-Channel MOSFET and Charge Pump #
The microcontroller switches the heater on and off via the MOSFET. Since the temperature measurement must be done over the same line and against
ground, the MOSFET has to be placed between the supply voltage and the heater (high-side switch). A P-Channel MOSFET is normally used for this configuration. However, N-Channel MOSFETs usually have a lower resistance (RDS (on)), in the case of the IRLR7843 only 3 milliohms. A low resistance means a higher efficiency and a lower heat development of the MOSFET. For an N-channel MOSFET to function as a high-side switch, an additional circuit is required to maintain a positive GATE-TO-SOURCE voltage even when the MOSFET is switched on. This is done using a so-called charge pump consisting of a capacitor and a diode.
ground, the MOSFET has to be placed between the supply voltage and the heater (high-side switch). A P-Channel MOSFET is normally used for this configuration. However, N-Channel MOSFETs usually have a lower resistance (RDS (on)), in the case of the IRLR7843 only 3 milliohms. A low resistance means a higher efficiency and a lower heat development of the MOSFET. For an N-channel MOSFET to function as a high-side switch, an additional circuit is required to maintain a positive GATE-TO-SOURCE voltage after the MOSFET is switched on. This is done using a so-called charge pump consisting of a capacitor and a diode.
![SolderingStationV2_ChargePump.png](https://image.easyeda.com/pullimage/UwAxl6ON0Pn9orkxrE9tfgfZAGFxWH5Xc9pkDvmm.png)