diff --git a/README.md b/README.md index fc7edba..fbe9d39 100644 --- a/README.md +++ b/README.md @@ -1,2 +1,21 @@ # ATmega-Soldering-Station -T12 Quick Heating Soldering Station +T12 Quick Heating Soldering Station featuring +- Temperature measurement of the tip +- Temperature control via rotary encoder +- Boost mode by short pressing rotary encoder switch +- Setup menu by long pressing rotary encoder switch +- Handle movement detection (by checking ball switch) +- Iron unconnected detection (by idenfying invalid temperature readings) +- Time driven sleep/power off mode if iron is unused (movement detection) +- Measurement of input voltage, Vcc and ATmega's internal temperature +- Information display on OLED +- Buzzer +- Calibrating and managing different soldering tips +- Storing user settings into the EEPROM + +Power supply should be in the range of 16V/2A to 24V/3A and well +stabilized. + +For calibration you need a soldering iron tips thermometer. For best results +wait at least three minutes after switching on the soldering station before +you start the calibration process.